Details
BOOST CONTROLLER
EVC6-IR 2.4
HKS' Traditional EVC Series
Advanced Boost Controller
LCD full color monitor is upgraded for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting.
EVC6-IR's TFT full color monitor size is enlarged to 2.4 inch from 2.2 inch for better visibility . (The case remains in the same size.)
HKS boost setting tool "EasyWriter" can be easily connected.
Basic performance as a boost controller is the same as EVC6-IR.
Correction map grid point : 10 x 10.
Pressure correction range : -180 - 180.
More precise correction is possible for modern smaller sized turbo.
Monitor Navigation System easily leads the user to the correct setting and logging screens.
The proven Stepping Motor is utilized as a valve unit.
FUNCTION
Display
Boost Setting Tool "EasyWriter"
This is for boost setting by PC.
Use a marketed USB communication cable to connect EVC and PC.
Download the software from HKS' website.
Connection Diagram
FUNCTIONS
Return-to stock
Boost pressure setting returns to stock pressure value when the unit is off.
Speed Single Input
Speed signal input enables the boost control with the speed. (500km/h)
Scramble
The boost pressure can be increased by a designated value above the set value.
Map Correction
Input of the throttle signal and engine RPM or vehicle speed signals enables the boost control by a 3D map using 2 these signals as axes.
3-mode Boost Setting
Boost pressure can be set in 3 different modes to use them for different conditions.
Triple Digital Meter
3 digital data readings of surge tank pressure and throttle angle, engine RPM or vehicle speed can be displayed in real time.
3-mode Offset Setting
The differences between the boost pressure set value and actual value can be offset in 3 different modes. This ensures more precise setting.
Bar Graph Selection
Select the type of a bar graph from the boost pressure, throttle angle, engine RPM and vehicle speed.
Warning
If the boost exceeds the warning value, an audible beep and visible warning display notify the user. Also, the boost is lowered to the stock value or a preset value to prevents damage to the engine.
Bar Graph Peak Hold
The bar graph displays the maximum value after it is reached. It can achieve easy instant recognition.
Throttle Signal Input
Throttle position sensor signal input enables the boost control with the throttle angle.
After Image
The maximum positive boost value is displayed for 3 seconds when the boost changes from positive pressure to negative pressure.
Engine RPM Signal Input
Engine RPM signal input or ignition signal input enables the boost control with the engine RPM.
(1 to 8 cylinders/up to 12000rpm)
Data Memory
All settings are stored in the internal memory; so settings will not be lost even when the ignition is off or the battery is disconnected.
Display Brightness Selection
Select the display unit's brightness from 2 levels.
HKS electronic devices will provide the better driving performance and support for your vehicles.
You will need electronic control devices and software settings for the ultimate tuning performance. The electronic control devices will control the vehicles in a higher level for the best total tuning performance. Modern vehicles are equipped with sophisticated software that controls the vehicles and HKS provides easy to use for beginners and also provide supports for professional tuners.
This product is compatible with the following vehicles
Vehicle Make
Vehicle Model
Vehicle Variant
From
To
Engine
Notes
Universal
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning ...