Website no longer active. Please use our new website Tegiwa.com
Details
Competition/Traction Bar Kit for the 1992-2001 Honda Prelude (BB)
Designed to replace the stock crossmember of the Prelude BB chassis.
- Works With A/T & M/T
- Comes with Optional Front Torque Mounting Bracket for use with our Front Mount
- Includes 2 tow hooks
- Gives Extra Front Clearance
- Clears All Factory Headers
- Enhances Vehicle Rigidity and Overall Driving Accuracy
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension. By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
NOTE:
- This traction/competition bar kit was NOT designed to fit the 97-01 Prelude SH/BB6 trim. For that vehicles application, please see:
97-01 PRELUDE TYPE SH REPLACEMENT CROSSMEMBER BAR - 50111
- This kit also comes with a transmission underside brace. This brace is unnecessary if you purchase our optional front mount, which bolts to our competition/traction bar:
92-01 PRELUDE / 94-97 ACCORD FRONT TORQUE MOUNT - 29740
Weight: 30lbs
Designed to replace the stock crossmember of the Prelude BB chassis.
- Works With A/T & M/T
- Comes with Optional Front Torque Mounting Bracket for use with our Front Mount
- Includes 2 tow hooks
- Gives Extra Front Clearance
- Clears All Factory Headers
- Enhances Vehicle Rigidity and Overall Driving Accuracy
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension. By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
This Comp/Traction bar kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped with a race grade heim/spherical joint allowing for an oem fitment that is adjustable to suit all vehicle setups, whether a proload is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design it will also accept the use of larger downpipes and manifolds.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design it will also accept the use of larger downpipes and manifolds.
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
NOTE:
- This traction/competition bar kit was NOT designed to fit the 97-01 Prelude SH/BB6 trim. For that vehicles application, please see:
97-01 PRELUDE TYPE SH REPLACEMENT CROSSMEMBER BAR - 50111
- This kit also comes with a transmission underside brace. This brace is unnecessary if you purchase our optional front mount, which bolts to our competition/traction bar:
92-01 PRELUDE / 94-97 ACCORD FRONT TORQUE MOUNT - 29740
Weight: 30lbs
More Info
| Manufacturer | Innovative |
|---|---|
| Fitment | See Description |
| Colour | N/A |
| Note | Left and right parts are when looking from the drivers seat and NOT from in front of the car. |
- Be the first to review this product
You may also be interested in
Innovative Mounts Honda Prelude 97-01 Conversion Mount Kit (J-Series V6/Manual)
£518.58 Excl. Tax £622.30 Incl. Tax
Innovative Mounts Honda Prelude 88-91 Conversion Engine Mount Kit (H-Series/Manual)
£402.45 Excl. Tax £482.94 Incl. Tax
Innovative Mounts Honda Prelude 88-91 Competition/Traction Bar
£369.36 Excl. Tax £443.23 Incl. Tax
Hasport K24 Engine Mount kit with K24 Honda Accord Transmission Prelude 92-96
£614.14 Excl. Tax £736.97 Incl. Tax
© Tegiwa Imports Ltd | Registered in England Number 5798174
Finance provided by PayPal Credit. Terms and conditions apply. Credit subject to status, UK residents only, Tegiwa Imports LTD acts as a broker and offers finance from a restricted range of finance providers. PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.
Finance provided by PayPal Credit. Terms and conditions apply. Credit subject to status, UK residents only, Tegiwa Imports LTD acts as a broker and offers finance from a restricted range of finance providers. PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.