Website no longer active. Please use our new website Tegiwa.com
Details
Competition/Traction Bar for the JDM/EDM 1988-1991 Honda Civic/CRX (EE/EF) & 1990-1993 Honda Integra (DA)
Designed to replace the stock crossmember of the Integra DA9 & the Import(JDM/EDM) Civic/CRX EE8/EE9/EF8/EF9 chassis that came stock with B-Series engines &/or RHD.
- Works With A/T & M/T
- Gives Extra Front Clearance
- Clears All Factory Headers
- Enhances Vehicle Rigidity and Overall Driving Accuracy
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
NOTE:
Although this traction/competition bar kit was made for the JDM/EDM RHD/B-Series applications, alternate engines (engine swaps/conversions) can be used.
The stock USDM chassis will not work. If your Civic/CRX is USDM made please see:
- 88-91 CIVIC/CRX(USDM) COMPETITION TRACTION BAR (Stock D-Series) - 59112
The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension. By tying-in the front lower control arms to the frame, the front suspension becomes more solid, thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds. The design of the bar not only reduces unwanted lateral lower arm movement, but also ties the lower chassis legs together providing a much more rigid and stronger setup.
This Comp/Traction bar kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped with a race grade heim/spherical joint allowing for an oem fitment that is adjustable to suit all vehicle setups, whether a proload is needed or just to stop unwanted movement that can cause changes in suspension geometry during high speed cornering or launching.
The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design it will also accept the use of larger downpipes and manifolds.
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
NOTE:
Front Torque Mount Also Available:
- 88-91 CIVIC / CRX FRONT TORQUE ENGINE MOUNT & BRACKET (B-SERIES / CABLE) - 19143
Weight: 26lbs
More Info
| Manufacturer | Innovative |
|---|---|
| Fitment | See Description |
| Colour | N/A |
| Note | Left and right parts are when looking from the drivers seat and NOT from in front of the car. |
- Be the first to review this product
You may also be interested in
Innovative Mounts Honda Civic/CRX EE/EF 88-91 Conversion Mount Kit (K-Series /Manual)
£443.00 Excl. Tax £531.60 Incl. Tax
Innovative Mounts Honda Civic/CRX EE/EF 88-91 Conversion Mount Kit (H/F-Series/Manual)
£317.73 Excl. Tax £381.28 Incl. Tax
Hasport B-Series Swap Mount Kit Honda Civic/CRX 84-87 with Hydro transmission
£458.73 Excl. Tax £550.48 Incl. Tax
Hasport H-Series Swap Mount Kit Honda Civic/CRX 88-91 with Hydro Transmission
£614.14 Excl. Tax £736.97 Incl. Tax
Finance provided by PayPal Credit. Terms and conditions apply. Credit subject to status, UK residents only, Tegiwa Imports LTD acts as a broker and offers finance from a restricted range of finance providers. PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.
