Conversion Engine Mount Kit for 1988-1991 Honda Civic/CRX (ED/EE/EF)
Designed to fit the stock cable Civic ED/EE/EF chassis with D-Series engines when converting to a manual hydraulic transmission.
- Uses Factory/OEM Hardware
- Unique No-Tear Vibration Minimizing Bushings
- Optional Bushing Stiffness'
- Positions the Engine With No Axle Bind
- Actuator Pivots Smoothly Using State of the Art Spherical Bearings
- Actuator Mounts in the Same Fashion as the Factory Models and Works in the Same Plane as the Clutch Release Fork
- No Binding in the Clutch Release Fork and therefore No Premature Clutch Wear Caused by the Actuator
- Bolt-On
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
NOTE:
This kit requires the use of older model D-Series motors -
IF YOU ARE USING A 92+ D SERIES MOTOR PLEASE SEE PRODUCT 49152, THE DRIVER SIDE MOUNT IS SLIGHTLY DIFFERENT FOR THIS APPLICATION).
NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.
Weight: 15lbs
Manufacturer | Innovative |
---|---|
Fitment | See Description |
Colour | N/A |
Note | Left and right parts are when looking from the drivers seat and NOT from in front of the car. |